Here is a used Blizzard Power Hitch snow plow pump for Blizzard 8-10/810 expandable plow. With the Power Hitch Mounting system, the headgear with the lights stays in the truck mount if the plow itself is disconnected from the truck. On the newer Power Hitch 2, the lights and headgear all stay connected to the plow when the plow is disconnected from the truck. This pump will not work with Power Hitch 2 blades.
This pump is for parts. I do not know if this is a working pump.
It could be be, but don't expect it to be. The motor on the pump does run.
The fluid was clean when it was drained. This is for what you see in the pictures, it will come as pictured.
Has the motor, tank, valve block with valves and coils. Take a close look at the pictures and at your pump before purchasing this pump. I will not take a return on this pump. Pay special attention to the valve block/valve positions and ports for the hoses when figuring out if this the is right pump. Do not rely on the part number on the sticker on the pump tank.The motor and pump tank were attached to different valve blocks. Make sure this is the right pump for your plow before purchasing. This pump has ports for 8 hoses, the early 810 plows had 12 hoses, so this pump would not work for the early 12 hose 810 plows. At least one coil has a crack in the plastic as shown in the pictures. What you see is what you get, nothing more. Thanks for looking and see my other listings for more plow stuff. Thanks and feel free to ask any questions that you may have. Auctiva offers Free Image Hosting and Editing. The item "Blizzard Power Hitch 810 8-10 Parts/Pump Core Hydraulic Manifold Snow Plow" is in sale since Monday, October 12, 2020. This item is in the category "eBay Motors\Parts & Accessories\Car & Truck Parts\Exterior\Snow Plows & Parts". The seller is "coinsintime" and is located in Williamsport, Pennsylvania.
This item can be shipped to United States.